5 Best Water Powered Sump Pump | Know The Protector of The Crawlspace with 2022 Reformed Reviews

You are well known to a sump pump if you are an owner of a house having a basement. This stuff is beyond a machine in your daily life if you are using the basement as room for office, family, or anything else!

A small amount of stored water in the basement can cause troublesome in your daily life, like forming mold. Fortunately, we all have an electric sump pump in our house.

But what if you are out of power? That’s where the powered suction pump holds its’ importance. There are several battery-operated as well as the best water powered sump pump on the market. But battery-operated can’t be compared with water-powered one.

Water-powered are more reliable in doing their job. You will know the reason as you will go through the water powered sump pumps review.

Best Pick
Liberty, SJ10, Sump Pump, Water Powered
Liberty, SJ10, Sump Pump, Water Powered
Editor’s Choice
Basepump HB1000-PRO Premium
Basepump HB1000-PRO Premium
Budget Pick
Basepump HB1000 Water Powered Backup Sump Pump
Basepump HB1000 Water Powered Backup Sump Pump

 5 Top-Rated Water Powered Sump Pump Reviews

1. Basepump HB1000 Water Powered Backup Sump Pump  Budget-Friendly  

Basepump HB1000

Key Features:

  • Model number- HB1000
  • Water consumption- 10 GPM
  • Maximum pressure- 150 PSI
  • GPH- 900 to 1400
  • Dimension- 16 x 4 x 6 inches
  • Battery, charger, electricity- not needed
  • Warranty- 5 year
  • Water alarm- present
  • Trouble-free floating systems

Pumping rate of Basepump HB1000 ranges from 900 to 1400 gallons per hour. The stuff will be your ultimate backup at the time of power outage or electrical pump failure.

It is energetically efficient with a discharge ratio of 1:2 based on your municipal water pressure. In addition, the stuff shows its’ utmost unique quality with a long term warranty.

Sometimes it is troublesome to set the sump pump on the sump pit in case of a smaller sump hole. But Basepump HB 1000 will offer you to hang the pump from the ceiling. So, you are already out of trouble.

The stuff is well designed with a high alarm system during operation. The alarming water system is battery operated. As having the floating hydraulic system, the product is trouble-free and the most reliable one.

With excellent customer care, they do provide a number to contact.

The stuff producer claims the machine to be more-handy during installation. Remember that an initial setup will take about 3 hours.

  • No parts to move so, no possibility of breaking
  • No need for further maintenance
  • Smartly designed
  • High efficiency with excellent pumping rate. 2 gallons of sump water can be released using 1 gallon of water
  • Easy-to-install, no need for a professional plumber
  • They are great at customer service and got a praising reviews
  • Expensive product

2. Basepump HB1000-PRO Premium – Best Rating  

Basepump HB1000-PRO Premium

Key Features:

  • Part No – HB1000-D-PRO
  • Dimension of product – 16 x 4 x 6 inches
  • pressure – 150 PSI
  • GPH – 900 to 1400
  • Battery, charger, electricity- Not needed
  • Water consumption – 10 GPM
  • Water alarm – Present
  • Warranty – 5 year
  • Double-check valve with backflow preventer

Basepump HB1000-PRO Premium is mostly a popular choice for house owners due to their unique number of useful features.

It completely sucks the water with its easy installation process.

The house owner having a large basement with the right amount of water to eject can buy the stuff. The stuff can remove 900 to 1400 gallons of liquid in a unit hour.

Moreover, you can also have control over your water bill using this stuff well. The material controls the bill with its’ high efficiency. Your bill of water won’t speed up like a skyrocket.

You are offered a 5-year warranty with the stuff.

  • Overhead installation
  • No-sweat push-in type pipe is available
  • Double-check valve with backflow preventer
  • Water alarm that is high enough to alert you
  • Water usage can be reduced with its’ high efficiency
  • Needs a mounting solution in case the ceiling isn’t accommodating
  • Homes using old pipes or water from well will face problem due to less water pressure
  • Expensive one

3. Basepump RB750 Water Powered Backup Sump Pump ​

Basepump RB750

Key Features:

  • Part no – RB750-D
  • Dimension – 16 x 4 x 6 inches
  • Water consumption – 7 GPM
  • pressure – 90 PSI
  • GPH – 700 to 900
  • Warranty – 5 year
  • Basement area – Less than 2500 sq. ft.
  • Battery, charger- not needed
  • High alarm system – Present

Basepump RB750 Water Powered Backup is like the sibling of HB1000-Pro. The bells & the whistles of the stuff are much like theHB1000-Pro.

If your basement is less than 2500 sq, ft, then I would recommend the product for you.

The pumping rate is 700 to 900 GPH. Features, capability, warranty, efficiency all are like as HB1000.

Although it is a bit loud, it has excellent customer service.

If you want, you can also tie the output PVC with the current output of leading PVC.

The stuff comes in an excellent alarming system with a long term warranty. Luckily, the ceiling setting is what it needs. So, don’t panic if your sump hole is smaller than the standard size.

  • High efficiency as like as HB1000
  • Reliable and highly powerful
  • Good customer service
  • Easy-to-install
  • If you don’t have a water hammer-arrestor, then the product would be loud for you

4. Liberty, SJ10, Sump Pump – Best Pick  

Liberty Pumps SJ10

Key Features:

  • Part no. & source – SJ10 & Corded-electric
  • GPH – 1,185
  • Made in – America
  •  Commercial brand name: Liberty
  • Product dimension: 14.5 x 5.1 x 21.6 inches
  • Pressure acceptable – 20 PSI to 100 PSI
  • Extra backflow protection – needed
  • Warranty – 2 year
  • Electricity, battery – not needed

Liberty, SJ10 moves a lot of water, releasing 1,185 gallons/hour. The stuff gives its’ service at a low cost. So, in the rainy season or stormy days, you can be a pleasure.

Like other products, it is not perfect at all. There is a need for a sump pit, which is at least across 18 inches. Moreover, the pump needs to be seated across the top of the sump pit.

Ultimately it means, your sump pit can’t be closed using your conventional lid. It is pretty much reasonable if you don’t want to keep the hole uncovered. Therefore, you better find out some other solution to this problem.

The impressive fact is that the product comes being fully assembled and allows you to have an instruction manual for a thorough installation.

The pump is quite satisfying in terms of the service with high efficiency but a little bit noisy.

As it is water-powered, so you are free from damage to the basement at the time of power outage. Due to power by municipal water supply, no electricity will be required during operation. But the water source mandatorily needs to be uninterrupted.

The Sump-jet per 1 gallon removes sump water of amount 2 gallons is used, basing on 5 Ft. lift.

  • As a backup suction pipe, the cost is pretty good
  • Long-lasting
  • Highly efficient
  • Comes in fully assembled, you just need to install it following the manual instruction
  • Don’t allow the water bill to raise like a skyrocket
  • Little noisy
  • Don’t allow you to use a lid that is conventional
  • Your sump pit must have a diameter of the 18-inch measurement

5. Superior Pump 92900 12V Battery Back​

Superior Pump 92900

Key Features:

  • Part no. – 92900
  • Product dimension – 13 x 10 x 16.5 inches
  • GPH – 1380
  • Construction material – Thermoplastic (sturdy enough)
  • Automatic on/off switch – Present
  • 12-volt RV batteries
  • Battery – Needed (Min. 90 amp/hour rating & 175-minutes reserving capacity)
  • Factory testing – 100%
  • There are both 1-1/4 & 1-1/2 inch NPT available for discharging

With high holding capacity and thermoplastic material, the stuff can remove 1380 gallons in a unit hour. Every part of the product has passed the factory test.

With high-quality instruments and advanced design, the stuff contains an auto on/off the system. That is, you are relying on it for the long term.

Along with durable and reliable, the stuff is also too easy to afford and install. The product comes in a good state at an affordable price.

Even if you are not in an emergency for like the switch breaker has flipped, the stuff is ready to serve you. Avoid using auto mobile batteries without an emergency.

The stuff can lift water to a height of 25’ vertically

Though the material seems good in all terms but not free of limitation. It is said the thing isn’t entirely promising. The customer finds a problem with its’ lasting, alarm system, and even complaints about customer care.

  • Affordable price
  • Easy for installation and usage
  • Works in non-emergencies too
  • Sometimes people complaints that the stuff isn’t long-lasting & the customer care isn’t good enough
  • Some customer also have allegations that they have to turn off the water alarm manually

Buying Guide for the Water Powered Sump Pump

At first, let’s have a little chat. What is a water-powered sump pump stands for?

In case the primary suction pipe of your house isn’t working due to no electricity or any other cause, the water operated suction one will give ultimate protection to your basement. This one will take the water out of the sump pit by sucking the process using the water pressure.

Now, let’s talk about what the stuff needs to be the right product, indeed.

Size of the sump pit and the basement

The size of the pump is a matter to consider. Although most of them all made light weighted. But they do have a different form of dimension. As many of the suction pipes needed to be placed at a higher place like the ceiling, so they need to be more compact.

Now asking about which size will be preferable to know depends on the size of your basement and sump pit. By understanding the size of the two, you can guess the size of the suction pump you need.

Expected water amount

Well, due to their different form of size, they can handle several water amounts calculated in per hour. Though the water power suction pipe works as a backup, it can discharge the right amount of liquid.

The amount will always be written on the packaging. So, the packaging should have your proper attention!

The stuff you are buying should have your expected water handling capability.

Water from well or town

Your water line must be having hooked up with a water line that is municipal. If you are using well, then sorry to say, this suction pipe backup isn’t for you.

The pump is not going to work for you. The scientific explanation behind the working principle of the water pressure sump pumps is a bit fancy.

In short, the pump works on constant water pressure. The well is unable to give continuous water pressure. So, the pump needs a water supply from the town.

Water pressure

All suction pipes are designed in such a way that they required a minimum level of water pressure to work in accordance. What if you have more than the minimum amount?

Then, the stuff will provide more service also. But without that minimum pressure which the material requires, the pump is not even going to start.

What pressure your stuff needs must be written on the packaging. What is the influence of your water supply is to be known from your water supplier.

Or you can find an inexpensive-gauge to measure the pressure on your own. The gauge is available at any store of hardware.


GPH stands for Gallons Per Hour, one of the most crucial points in the buying guide. How much water a pump can discharge in gallons in a unit hour needs to be known.

How will you know which GPH is perfect for you? Well, you need to start with the question, “how much water you need to eject from your basement?” A rough estimate says that, in a sump pit of 18” diameter, one inch of the water is equal to approximately one gallon.

For having a rough idea, lets to a DIY.

On a rainy or stormy day, wait for your electric pump to stop. Take a yardstick and stick it in. Hold the stick for one minute correctly. Notice the rise in water level. The change in the water level needs to be multiplied by 60.

Now you can guess the gallons of water entering your sump pit per hour. If the water level rose from 2 to 10, then the rise is 8. Then multiplying 8 with 60, we get 480.

So, about 480 gallons of water are coming in per hour.


Another vital attribute is efficiency. Most pumps need one gallon of water to release or discharge one or two gallons of water of sump. The used water is municipal water.

You need to remind you that you are accountable for using town water. So, have a rough calculation of your profit and loss.

Most of the time, customers are always willing to pay a little more on water bills when the fact comes to keep the house basement dry.


That’s where the advertisement starts! All pump producer claims that the pump can be installed by their owner easily. If you go through the comment section of any review page, you can see how painful it is to the customer.

Only an expert can have the full enjoyment of installation.

It is better for you if they are all assembled, and your installation part is little to do.

Instead of that, your plumbing experience can assist you in tackling the installation in a day or a little less than it.

Moreover, for your guidance, there are lots of installation videos on YouTube on several products. Just go through them.


Indeed, your backup suction pipe is sucking up the water, but what next? Where is the path for the ultimate destination of the discharge water?

Well, there are two paths. One is to tie up the backup pump with the existing pump used for discharge, making the process of installation more straightforward.

Other is putting in a pipe nominated for discharge only for this sump pump. This solution is followed for bigger jobs.

But most users go for the second solution. Who would like to tie the backup system with a discharge pipe that is potentially faulty?

Noise prevention

Suction pipes that work as a backup can be either noisy or quiet as well. Some users want their sump pump to be silent or peaceful as a whisper, whereas; others want it to be loud.

You might be thinking who want sound pollution? The reason behind wanting it to be loud, so the owner can understand when the suction pump is under operation.

Many sump pumps are designed very smartly. They do make noise for your alertness of its’ working time, but they sound as an alarm.

Luckily, you can check the stuff at the time of buying to choose the one that matches your comfort level.


The suction pumps do come at different comprehensive prices. The fairest price would stand between $150 & $300. But it is not necessary that the pricy is the one giving the best service and the one that cost cheap will be substandard.

They have to buy the one that you get suited to your home after having research on features & efficiency.

Just relying on the brand and advertisement will not be a matter of wise. If you are having expected service with a one that costs $150, then spending $300 is just a waste of money.


After taking each & every point into consideration, the last thing you need to consider is the pleasure of your mind.

The suction pump will not be of any use if you keep feeling tense every time it storms or electricity goes off.

You need to prefer a product that works well in your home, irrespective of its characteristics, brand, or price.

Power outages don’t give a warning before it occurs. So, at first, you must prefer the one that is long-lasting and the one you can rely on.


Your town-water must be restored in a large container. That can be a tank or reservoir or something else. The water goes through different decreasing sizes of pipes approaching individual residences.

Due to this constriction, the water moves faster, resulting in pressure reduction. The pressure reduction takes out the sump pit water by sucking.

The sucking process works as if you are sucking water by a straw.

The sump water gets mixed with town water by a discharge pipe and gets out of your building.

As the whole process works on water pressure, so no electricity is involved in the process. Moreover, it is a backup during electricity failure.

Frequently Asked Questions

What is the cause behind setting a 2nd sump pump in the basement?

Ans: This 2nd backup suction pump isn’t similar to the primary sump pump. It is a backup for your main suction pump. Like a machine, the prime suction pipe might get faulty or out of service due to no electricity.

That’s the time when this 2nd suction pipe takes over as backup to remove the water from the basement. As long as there is running water, this 2nd pump will be in service for discharging water.

Why would you prefer water-powered over battery-powered backup?

Ans: It is not that everyone should prefer the one that I prefer. Many people are using the battery-powered backup. But it has its’ limitation, and the biggest of them is the battery can also run out of power.

So, what’s the benefit of such an alternative. If the power outage is for a short period, then it is not a big deal. But, if it is for a lengthy time, then it can be disastrous.

A water-powered pump will run continuously as long as there is running water supply even if you are having one week of an electrical outage.

Will the water-powered backup affect your water bill?

Ans: Of course, as you are using the municipal water supply to operate the machine. But the bill will be less than your expectation based on which pump you are using.

Your water bill to run the machine will never cross the repairing price of a damaged flooded basement.

Can the water generated one be my primary suction pipe?

Ans: No. The water-powered pump is only for backup. The electrical one is more beneficial and handy to prevent a flood.

Can the water operated suction pipe be installed by myself?

Ans: Your plumbing experience will indeed assist you in installing the pump as most pumps are easy to handle.

But if you don’t feel comfortable or want to make the job done so accurately, then you can contact any professional worker for the installation.

What is the reason behind setting a pump having lower discharging capability?

Ans: To save money. In case you are having a lower basement or your area doesn’t experience any higher flooding, then your work can be done using a pump having lower discharging capability.

This can save money on the cost of the machine as well as on the water bill as it uses a lower amount of municipal water.

What is the solution to not using municipal water?

Ans: Contact the local provider of municipal water in your locality. You may have a city connection at the time of emergency in case you don’t have the municipal water source as primary.

Powered by water vs battery backup

Why would you choose water powered backup or battery-operated backup for a sump pump?

Well, both have their own pros & cons. The one that most suited to you, you can rely on.


  • No battery
  • Run endlessly for a lengthy time


  • Your plumb wire must have a provision to install a water backup suction pipe.
  • There should be a sump under the surface level with a moving stream of the water supply of municipal.


  • Being versatile is suitable for use in most of the homes
  • Super-easy-to-install
  • Extremely powerful


  • Expensive for the high capability to work.

Final verdict

In my last opinion, I would select the Liberty, SJ10 as an excellent product among the best water powered sump pump. It is such a great American product with advanced features. It also has an excellent rating and satisfactory reviews from the users.

The second one I would like to nominate is Basepump HB1000-PRO Premium, that one product that has gained a very high rating of 4.7 with a 5-year warranty. Its’ advanced technology has satisfied the users.

The third one I like to recommend is Basepump HB1000 Water Powered Backup. If you are finding some product offering you lots of features along with long term warranty at an affordable price, then this one is what you are searching for!

Leave a Comment